3105 Aluminum vs. C19020 Copper
3105 aluminum belongs to the aluminum alloys classification, while C19020 copper belongs to the copper alloys. There are 26 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 3105 aluminum and the bottom bar is C19020 copper.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 69 | |
120 |
Elongation at Break, % | 1.1 to 20 | |
2.3 to 5.7 |
Poisson's Ratio | 0.33 | |
0.34 |
Shear Modulus, GPa | 26 | |
44 |
Shear Strength, MPa | 77 to 140 | |
260 to 340 |
Tensile Strength: Ultimate (UTS), MPa | 120 to 240 | |
440 to 590 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
210 |
Maximum Temperature: Mechanical, °C | 180 | |
200 |
Melting Completion (Liquidus), °C | 660 | |
1090 |
Melting Onset (Solidus), °C | 640 | |
1030 |
Specific Heat Capacity, J/kg-K | 900 | |
390 |
Thermal Conductivity, W/m-K | 170 | |
190 |
Thermal Expansion, µm/m-K | 24 | |
17 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 44 | |
50 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 140 | |
50 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 9.5 | |
31 |
Density, g/cm3 | 2.8 | |
8.9 |
Embodied Carbon, kg CO2/kg material | 8.2 | |
2.8 |
Embodied Energy, MJ/kg | 150 | |
44 |
Embodied Water, L/kg | 1180 | |
310 |
Common Calculations
Stiffness to Weight: Axial, points | 14 | |
7.2 |
Stiffness to Weight: Bending, points | 50 | |
18 |
Strength to Weight: Axial, points | 12 to 24 | |
14 to 18 |
Strength to Weight: Bending, points | 20 to 31 | |
14 to 18 |
Thermal Diffusivity, mm2/s | 68 | |
55 |
Thermal Shock Resistance, points | 5.2 to 11 | |
16 to 21 |
Alloy Composition
Aluminum (Al), % | 96 to 99.5 | |
0 |
Chromium (Cr), % | 0 to 0.2 | |
0 |
Copper (Cu), % | 0 to 0.3 | |
95.7 to 99.19 |
Iron (Fe), % | 0 to 0.7 | |
0 |
Magnesium (Mg), % | 0.2 to 0.8 | |
0 |
Manganese (Mn), % | 0.3 to 0.8 | |
0 |
Nickel (Ni), % | 0 | |
0.5 to 3.0 |
Phosphorus (P), % | 0 | |
0.010 to 0.2 |
Silicon (Si), % | 0 to 0.6 | |
0 |
Tin (Sn), % | 0 | |
0.3 to 0.9 |
Titanium (Ti), % | 0 to 0.1 | |
0 |
Zinc (Zn), % | 0 to 0.4 | |
0 |
Residuals, % | 0 | |
0 to 0.2 |