MakeItFrom.com
Menu (ESC)

319.0 Aluminum vs. AWS BNi-6

319.0 aluminum belongs to the aluminum alloys classification, while AWS BNi-6 belongs to the nickel alloys. There are 19 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 319.0 aluminum and the bottom bar is AWS BNi-6.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
160
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 27
62
Tensile Strength: Ultimate (UTS), MPa 190 to 240
450

Thermal Properties

Latent Heat of Fusion, J/g 480
260
Melting Completion (Liquidus), °C 600
880
Melting Onset (Solidus), °C 540
880
Specific Heat Capacity, J/kg-K 880
480
Thermal Expansion, µm/m-K 22
9.8

Otherwise Unclassified Properties

Base Metal Price, % relative 10
55
Density, g/cm3 2.9
8.2
Embodied Carbon, kg CO2/kg material 7.7
9.4
Embodied Energy, MJ/kg 140
130
Embodied Water, L/kg 1080
210

Common Calculations

Stiffness to Weight: Axial, points 14
11
Stiffness to Weight: Bending, points 48
22
Strength to Weight: Axial, points 18 to 24
15
Strength to Weight: Bending, points 25 to 30
16
Thermal Shock Resistance, points 8.6 to 11
20

Alloy Composition

Aluminum (Al), % 85.8 to 91.5
0 to 0.050
Carbon (C), % 0
0 to 0.060
Cobalt (Co), % 0
0 to 0.1
Copper (Cu), % 3.0 to 4.0
0
Iron (Fe), % 0 to 1.0
0
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.5
0
Nickel (Ni), % 0 to 0.35
87.2 to 90
Phosphorus (P), % 0
10 to 12
Selenium (Se), % 0
0 to 0.0050
Silicon (Si), % 5.5 to 6.5
0
Sulfur (S), % 0
0 to 0.020
Titanium (Ti), % 0 to 0.25
0 to 0.050
Zinc (Zn), % 0 to 1.0
0
Zirconium (Zr), % 0
0 to 0.050
Residuals, % 0
0 to 0.5