MakeItFrom.com
Menu (ESC)

319.0 Aluminum vs. EN 1.4826 Stainless Steel

319.0 aluminum belongs to the aluminum alloys classification, while EN 1.4826 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 319.0 aluminum and the bottom bar is EN 1.4826 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 78 to 84
150
Elastic (Young's, Tensile) Modulus, GPa 72
200
Elongation at Break, % 1.8 to 2.0
9.1
Fatigue Strength, MPa 76 to 80
140
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 190 to 240
500
Tensile Strength: Yield (Proof), MPa 110 to 180
260

Thermal Properties

Latent Heat of Fusion, J/g 480
310
Maximum Temperature: Mechanical, °C 170
950
Melting Completion (Liquidus), °C 600
1400
Melting Onset (Solidus), °C 540
1360
Specific Heat Capacity, J/kg-K 880
490
Thermal Conductivity, W/m-K 110
14
Thermal Expansion, µm/m-K 22
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 27
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 84
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 10
17
Density, g/cm3 2.9
7.7
Embodied Carbon, kg CO2/kg material 7.7
3.3
Embodied Energy, MJ/kg 140
47
Embodied Water, L/kg 1080
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.3 to 3.9
39
Resilience: Unit (Modulus of Resilience), kJ/m3 88 to 220
170
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 48
25
Strength to Weight: Axial, points 18 to 24
18
Strength to Weight: Bending, points 25 to 30
18
Thermal Diffusivity, mm2/s 44
3.7
Thermal Shock Resistance, points 8.6 to 11
11

Alloy Composition

Aluminum (Al), % 85.8 to 91.5
0
Carbon (C), % 0
0.3 to 0.5
Chromium (Cr), % 0
21 to 23
Copper (Cu), % 3.0 to 4.0
0
Iron (Fe), % 0 to 1.0
60.4 to 68.7
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.5
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.35
9.0 to 11
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 5.5 to 6.5
1.0 to 2.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 1.0
0
Residuals, % 0 to 0.5
0