MakeItFrom.com
Menu (ESC)

324.0 Aluminum vs. EN 1.4513 Stainless Steel

324.0 aluminum belongs to the aluminum alloys classification, while EN 1.4513 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 324.0 aluminum and the bottom bar is EN 1.4513 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 3.0 to 4.0
26
Fatigue Strength, MPa 77 to 89
170
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 210 to 310
480
Tensile Strength: Yield (Proof), MPa 110 to 270
240

Thermal Properties

Latent Heat of Fusion, J/g 500
280
Maximum Temperature: Mechanical, °C 170
880
Melting Completion (Liquidus), °C 610
1450
Melting Onset (Solidus), °C 550
1410
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 150
25
Thermal Expansion, µm/m-K 21
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 120
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
10
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 7.9
2.5
Embodied Energy, MJ/kg 150
35
Embodied Water, L/kg 1090
120

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.8 to 8.9
100
Resilience: Unit (Modulus of Resilience), kJ/m3 85 to 510
150
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 52
25
Strength to Weight: Axial, points 22 to 32
17
Strength to Weight: Bending, points 29 to 38
18
Thermal Diffusivity, mm2/s 62
6.8
Thermal Shock Resistance, points 9.7 to 14
17

Alloy Composition

Aluminum (Al), % 87.3 to 92.2
0
Carbon (C), % 0
0 to 0.025
Chromium (Cr), % 0
16 to 18
Copper (Cu), % 0.4 to 0.6
0
Iron (Fe), % 0 to 1.2
77.7 to 83.1
Magnesium (Mg), % 0.4 to 0.7
0
Manganese (Mn), % 0 to 0.5
0 to 1.0
Molybdenum (Mo), % 0
0.8 to 1.4
Nickel (Ni), % 0 to 0.3
0
Nitrogen (N), % 0
0 to 0.020
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 7.0 to 8.0
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.2
0.15 to 0.8
Zinc (Zn), % 0 to 1.0
0
Residuals, % 0 to 0.2
0