MakeItFrom.com
Menu (ESC)

328.0 Aluminum vs. C82200 Copper

328.0 aluminum belongs to the aluminum alloys classification, while C82200 copper belongs to the copper alloys. There are 28 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 328.0 aluminum and the bottom bar is C82200 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
120
Elongation at Break, % 1.6 to 2.1
8.0 to 20
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 27
44
Tensile Strength: Ultimate (UTS), MPa 200 to 270
390 to 660
Tensile Strength: Yield (Proof), MPa 120 to 170
210 to 520

Thermal Properties

Latent Heat of Fusion, J/g 510
220
Maximum Temperature: Mechanical, °C 180
230
Melting Completion (Liquidus), °C 620
1080
Melting Onset (Solidus), °C 560
1040
Specific Heat Capacity, J/kg-K 890
390
Thermal Conductivity, W/m-K 120
180
Thermal Expansion, µm/m-K 22
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30
45
Electrical Conductivity: Equal Weight (Specific), % IACS 99
46

Otherwise Unclassified Properties

Base Metal Price, % relative 10
55
Density, g/cm3 2.7
8.9
Embodied Carbon, kg CO2/kg material 7.8
4.8
Embodied Energy, MJ/kg 140
74
Embodied Water, L/kg 1070
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.8 to 5.0
49 to 66
Resilience: Unit (Modulus of Resilience), kJ/m3 92 to 200
180 to 1130
Stiffness to Weight: Axial, points 15
7.4
Stiffness to Weight: Bending, points 51
18
Strength to Weight: Axial, points 21 to 28
12 to 20
Strength to Weight: Bending, points 28 to 34
13 to 19
Thermal Diffusivity, mm2/s 50
53
Thermal Shock Resistance, points 9.2 to 12
14 to 23

Alloy Composition

Aluminum (Al), % 84.5 to 91.1
0
Beryllium (Be), % 0
0.35 to 0.8
Chromium (Cr), % 0 to 0.35
0
Cobalt (Co), % 0
0 to 0.3
Copper (Cu), % 1.0 to 2.0
97.4 to 98.7
Iron (Fe), % 0 to 1.0
0
Magnesium (Mg), % 0.2 to 0.6
0
Manganese (Mn), % 0.2 to 0.6
0
Nickel (Ni), % 0 to 0.25
1.0 to 2.0
Silicon (Si), % 7.5 to 8.5
0
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 1.5
0
Residuals, % 0
0 to 0.5

Comparable Variants