MakeItFrom.com
Menu (ESC)

332.0 Aluminum vs. EN 1.4373 Stainless Steel

332.0 aluminum belongs to the aluminum alloys classification, while EN 1.4373 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 332.0 aluminum and the bottom bar is EN 1.4373 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110
230
Elastic (Young's, Tensile) Modulus, GPa 73
200
Elongation at Break, % 1.0
46
Fatigue Strength, MPa 90
340
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Shear Strength, MPa 190
530
Tensile Strength: Ultimate (UTS), MPa 250
750
Tensile Strength: Yield (Proof), MPa 190
370

Thermal Properties

Latent Heat of Fusion, J/g 530
290
Maximum Temperature: Mechanical, °C 170
910
Melting Completion (Liquidus), °C 580
1400
Melting Onset (Solidus), °C 530
1360
Specific Heat Capacity, J/kg-K 880
480
Thermal Conductivity, W/m-K 100
15
Thermal Expansion, µm/m-K 21
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 84
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 10
13
Density, g/cm3 2.8
7.7
Embodied Carbon, kg CO2/kg material 7.8
2.8
Embodied Energy, MJ/kg 140
40
Embodied Water, L/kg 1040
150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.3
290
Resilience: Unit (Modulus of Resilience), kJ/m3 250
340
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 24
27
Strength to Weight: Bending, points 31
24
Thermal Diffusivity, mm2/s 42
4.0
Thermal Shock Resistance, points 12
16

Alloy Composition

Aluminum (Al), % 80.1 to 89
0
Carbon (C), % 0
0 to 0.15
Chromium (Cr), % 0
17 to 19
Copper (Cu), % 2.0 to 4.0
0
Iron (Fe), % 0 to 1.2
63 to 71.5
Magnesium (Mg), % 0.5 to 1.5
0
Manganese (Mn), % 0 to 0.5
7.5 to 10.5
Nickel (Ni), % 0 to 0.5
4.0 to 6.0
Nitrogen (N), % 0
0.050 to 0.25
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 8.5 to 10.5
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 1.0
0
Residuals, % 0 to 0.5
0