MakeItFrom.com
Menu (ESC)

333.0 Aluminum vs. EN 1.1147 Steel

333.0 aluminum belongs to the aluminum alloys classification, while EN 1.1147 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 333.0 aluminum and the bottom bar is EN 1.1147 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 90 to 110
110 to 140
Elastic (Young's, Tensile) Modulus, GPa 73
190
Elongation at Break, % 1.0 to 2.0
12 to 17
Fatigue Strength, MPa 83 to 100
180 to 250
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
73
Shear Strength, MPa 190 to 230
280
Tensile Strength: Ultimate (UTS), MPa 230 to 280
390 to 470
Tensile Strength: Yield (Proof), MPa 130 to 210
280 to 370

Thermal Properties

Latent Heat of Fusion, J/g 520
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 590
1460
Melting Onset (Solidus), °C 530
1420
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 100 to 140
51
Thermal Expansion, µm/m-K 21
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26 to 35
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 83 to 110
8.1

Otherwise Unclassified Properties

Base Metal Price, % relative 10
1.8
Density, g/cm3 2.8
7.8
Embodied Carbon, kg CO2/kg material 7.6
1.4
Embodied Energy, MJ/kg 140
18
Embodied Water, L/kg 1040
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.1 to 4.6
40 to 73
Resilience: Unit (Modulus of Resilience), kJ/m3 120 to 290
210 to 370
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 49
24
Strength to Weight: Axial, points 22 to 27
14 to 17
Strength to Weight: Bending, points 29 to 34
15 to 17
Thermal Diffusivity, mm2/s 42 to 57
14
Thermal Shock Resistance, points 11 to 13
12 to 15

Alloy Composition

Aluminum (Al), % 81.8 to 89
0
Carbon (C), % 0
0.15 to 0.19
Copper (Cu), % 3.0 to 4.0
0 to 0.25
Iron (Fe), % 0 to 1.0
98.3 to 99.25
Magnesium (Mg), % 0.050 to 0.5
0
Manganese (Mn), % 0 to 0.5
0.6 to 0.9
Nickel (Ni), % 0 to 0.5
0
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 8.0 to 10
0 to 0.3
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 1.0
0
Residuals, % 0 to 0.5
0