MakeItFrom.com
Menu (ESC)

333.0 Aluminum vs. Grade FDSiCrV Steel

333.0 aluminum belongs to the aluminum alloys classification, while grade FDSiCrV steel belongs to the iron alloys. There are 25 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 333.0 aluminum and the bottom bar is grade FDSiCrV steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 90 to 110
630
Elastic (Young's, Tensile) Modulus, GPa 73
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
80
Tensile Strength: Ultimate (UTS), MPa 230 to 280
2100

Thermal Properties

Latent Heat of Fusion, J/g 520
270
Maximum Temperature: Mechanical, °C 170
420
Melting Completion (Liquidus), °C 590
1440
Melting Onset (Solidus), °C 530
1400
Specific Heat Capacity, J/kg-K 880
480
Thermal Conductivity, W/m-K 100 to 140
47
Thermal Expansion, µm/m-K 21
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26 to 35
7.4
Electrical Conductivity: Equal Weight (Specific), % IACS 83 to 110
8.6

Otherwise Unclassified Properties

Base Metal Price, % relative 10
2.3
Density, g/cm3 2.8
7.7
Embodied Carbon, kg CO2/kg material 7.6
1.9
Embodied Energy, MJ/kg 140
26
Embodied Water, L/kg 1040
50

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 49
25
Strength to Weight: Axial, points 22 to 27
75
Strength to Weight: Bending, points 29 to 34
47
Thermal Diffusivity, mm2/s 42 to 57
13
Thermal Shock Resistance, points 11 to 13
63

Alloy Composition

Aluminum (Al), % 81.8 to 89
0
Carbon (C), % 0
0.5 to 0.7
Chromium (Cr), % 0
0.5 to 1.0
Copper (Cu), % 3.0 to 4.0
0 to 0.12
Iron (Fe), % 0 to 1.0
96 to 97.8
Magnesium (Mg), % 0.050 to 0.5
0
Manganese (Mn), % 0 to 0.5
0.4 to 0.9
Nickel (Ni), % 0 to 0.5
0
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 8.0 to 10
1.2 to 1.7
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.25
0
Vanadium (V), % 0
0.1 to 0.25
Zinc (Zn), % 0 to 1.0
0
Residuals, % 0 to 0.5
0