MakeItFrom.com
Menu (ESC)

360.0 Aluminum vs. SAE-AISI 1038 Steel

360.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1038 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 360.0 aluminum and the bottom bar is SAE-AISI 1038 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 75
170 to 180
Elastic (Young's, Tensile) Modulus, GPa 72
190
Elongation at Break, % 2.5
14 to 20
Fatigue Strength, MPa 140
220 to 350
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Shear Strength, MPa 190
370 to 390
Tensile Strength: Ultimate (UTS), MPa 300
590 to 640
Tensile Strength: Yield (Proof), MPa 170
320 to 540

Thermal Properties

Latent Heat of Fusion, J/g 530
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 590
1460
Melting Onset (Solidus), °C 570
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 130
51
Thermal Expansion, µm/m-K 21
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 110
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.8
Density, g/cm3 2.6
7.8
Embodied Carbon, kg CO2/kg material 7.8
1.4
Embodied Energy, MJ/kg 140
18
Embodied Water, L/kg 1070
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.4
83 to 100
Resilience: Unit (Modulus of Resilience), kJ/m3 200
270 to 790
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 53
24
Strength to Weight: Axial, points 32
21 to 23
Strength to Weight: Bending, points 38
20 to 21
Thermal Diffusivity, mm2/s 55
14
Thermal Shock Resistance, points 14
19 to 20

Alloy Composition

Aluminum (Al), % 85.1 to 90.6
0
Carbon (C), % 0
0.35 to 0.42
Copper (Cu), % 0 to 0.6
0
Iron (Fe), % 0 to 2.0
98.6 to 99.05
Magnesium (Mg), % 0.4 to 0.6
0
Manganese (Mn), % 0 to 0.35
0.6 to 0.9
Nickel (Ni), % 0 to 0.5
0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 9.0 to 10
0
Sulfur (S), % 0
0 to 0.050
Tin (Sn), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.25
0