MakeItFrom.com
Menu (ESC)

364.0 Aluminum vs. SAE-AISI M10 Steel

364.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI M10 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 364.0 aluminum and the bottom bar is SAE-AISI M10 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
200
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
76
Tensile Strength: Ultimate (UTS), MPa 300
740 to 2170

Thermal Properties

Latent Heat of Fusion, J/g 520
270
Melting Completion (Liquidus), °C 600
1520
Melting Onset (Solidus), °C 560
1470
Specific Heat Capacity, J/kg-K 900
460
Thermal Conductivity, W/m-K 120
31
Thermal Expansion, µm/m-K 21
12

Otherwise Unclassified Properties

Base Metal Price, % relative 11
14
Density, g/cm3 2.6
7.9
Embodied Carbon, kg CO2/kg material 8.0
8.3
Embodied Energy, MJ/kg 150
120
Embodied Water, L/kg 1080
100

Common Calculations

Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 53
24
Strength to Weight: Axial, points 31
26 to 76
Strength to Weight: Bending, points 38
23 to 47
Thermal Diffusivity, mm2/s 51
8.5
Thermal Shock Resistance, points 14
23 to 68

Alloy Composition

Aluminum (Al), % 87.2 to 92
0
Beryllium (Be), % 0.020 to 0.040
0
Carbon (C), % 0
0.84 to 1.1
Chromium (Cr), % 0.25 to 0.5
3.8 to 4.5
Copper (Cu), % 0 to 0.2
0 to 0.25
Iron (Fe), % 0 to 1.5
82.3 to 85.6
Magnesium (Mg), % 0.2 to 0.4
0
Manganese (Mn), % 0 to 0.1
0.1 to 0.4
Molybdenum (Mo), % 0
7.8 to 8.5
Nickel (Ni), % 0 to 0.15
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 7.5 to 9.5
0.2 to 0.45
Sulfur (S), % 0
0 to 0.030
Tin (Sn), % 0 to 0.15
0
Vanadium (V), % 0
1.8 to 2.2
Zinc (Zn), % 0 to 0.15
0
Residuals, % 0 to 0.15
0