MakeItFrom.com
Menu (ESC)

383.0 Aluminum vs. EN 1.5681 Steel

383.0 aluminum belongs to the aluminum alloys classification, while EN 1.5681 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 383.0 aluminum and the bottom bar is EN 1.5681 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 75
190
Elastic (Young's, Tensile) Modulus, GPa 73
190
Elongation at Break, % 3.5
20
Fatigue Strength, MPa 150
300
Impact Strength: V-Notched Charpy, J 4.0
110
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
73
Tensile Strength: Ultimate (UTS), MPa 280
630
Tensile Strength: Yield (Proof), MPa 150
430

Thermal Properties

Latent Heat of Fusion, J/g 540
250
Maximum Temperature: Mechanical, °C 170
420
Melting Completion (Liquidus), °C 580
1460
Melting Onset (Solidus), °C 540
1420
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 96
48
Thermal Expansion, µm/m-K 21
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 23
7.9
Electrical Conductivity: Equal Weight (Specific), % IACS 74
9.0

Otherwise Unclassified Properties

Base Metal Price, % relative 10
5.0
Density, g/cm3 2.8
7.9
Embodied Carbon, kg CO2/kg material 7.5
1.9
Embodied Energy, MJ/kg 140
25
Embodied Water, L/kg 1030
55

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 8.2
110
Resilience: Unit (Modulus of Resilience), kJ/m3 150
490
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 28
22
Strength to Weight: Bending, points 34
21
Thermal Diffusivity, mm2/s 39
13
Thermal Shock Resistance, points 13
19

Alloy Composition

Aluminum (Al), % 79.7 to 88.5
0
Carbon (C), % 0
0.060 to 0.12
Copper (Cu), % 2.0 to 3.0
0
Iron (Fe), % 0 to 1.3
92.9 to 94.9
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.5
0.5 to 0.8
Nickel (Ni), % 0 to 0.3
4.5 to 5.5
Phosphorus (P), % 0
0 to 0.020
Silicon (Si), % 9.5 to 11.5
0 to 0.6
Sulfur (S), % 0
0 to 0.020
Tin (Sn), % 0 to 0.15
0
Zinc (Zn), % 0 to 3.0
0
Residuals, % 0 to 0.5
0