MakeItFrom.com
Menu (ESC)

390.0 Aluminum vs. EN 1.4008 Stainless Steel

390.0 aluminum belongs to the aluminum alloys classification, while EN 1.4008 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 390.0 aluminum and the bottom bar is EN 1.4008 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 75
190
Elongation at Break, % 1.0
17
Fatigue Strength, MPa 76 to 110
300
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 28
76
Tensile Strength: Ultimate (UTS), MPa 280 to 300
670
Tensile Strength: Yield (Proof), MPa 240 to 270
500

Thermal Properties

Latent Heat of Fusion, J/g 640
280
Maximum Temperature: Mechanical, °C 170
760
Melting Completion (Liquidus), °C 650
1450
Melting Onset (Solidus), °C 560
1400
Specific Heat Capacity, J/kg-K 880
480
Thermal Conductivity, W/m-K 130
25
Thermal Expansion, µm/m-K 18
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 24 to 25
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 79 to 83
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 11
8.0
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 7.3
2.1
Embodied Energy, MJ/kg 130
30
Embodied Water, L/kg 950
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.7 to 2.9
100
Resilience: Unit (Modulus of Resilience), kJ/m3 380 to 470
630
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 52
25
Strength to Weight: Axial, points 28 to 30
24
Strength to Weight: Bending, points 35 to 36
22
Thermal Diffusivity, mm2/s 56
6.7
Thermal Shock Resistance, points 14 to 15
23

Alloy Composition

Aluminum (Al), % 74.5 to 79.6
0
Carbon (C), % 0
0 to 0.1
Chromium (Cr), % 0
12 to 13.5
Copper (Cu), % 4.0 to 5.0
0
Iron (Fe), % 0 to 1.3
81.8 to 86.8
Magnesium (Mg), % 0.45 to 0.65
0
Manganese (Mn), % 0 to 0.1
0 to 1.0
Molybdenum (Mo), % 0
0.2 to 0.5
Nickel (Ni), % 0
1.0 to 2.0
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 16 to 18
0 to 1.0
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.2
0