MakeItFrom.com
Menu (ESC)

392.0 Aluminum vs. EN 1.6771 Steel

392.0 aluminum belongs to the aluminum alloys classification, while EN 1.6771 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 392.0 aluminum and the bottom bar is EN 1.6771 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 75
190
Elongation at Break, % 0.86
8.0 to 8.7
Fatigue Strength, MPa 190
440 to 680
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
73
Tensile Strength: Ultimate (UTS), MPa 290
930 to 1180
Tensile Strength: Yield (Proof), MPa 270
740 to 1140

Thermal Properties

Latent Heat of Fusion, J/g 670
250
Maximum Temperature: Mechanical, °C 170
440
Melting Completion (Liquidus), °C 670
1460
Melting Onset (Solidus), °C 580
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 130
46
Thermal Expansion, µm/m-K 19
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
8.0
Electrical Conductivity: Equal Weight (Specific), % IACS 90
9.2

Otherwise Unclassified Properties

Base Metal Price, % relative 10
5.0
Density, g/cm3 2.5
7.9
Embodied Carbon, kg CO2/kg material 7.5
1.9
Embodied Energy, MJ/kg 140
25
Embodied Water, L/kg 950
58

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.4
75 to 93
Resilience: Unit (Modulus of Resilience), kJ/m3 490
1460 to 3450
Stiffness to Weight: Axial, points 17
13
Stiffness to Weight: Bending, points 56
24
Strength to Weight: Axial, points 32
33 to 41
Strength to Weight: Bending, points 39
27 to 31
Thermal Diffusivity, mm2/s 60
13
Thermal Shock Resistance, points 15
27 to 35

Alloy Composition

Aluminum (Al), % 73.9 to 80.6
0
Carbon (C), % 0
0.27 to 0.33
Chromium (Cr), % 0
0.8 to 1.2
Copper (Cu), % 0.4 to 0.8
0
Iron (Fe), % 0 to 1.5
92.2 to 95
Magnesium (Mg), % 0.8 to 1.2
0
Manganese (Mn), % 0.2 to 0.6
0.6 to 1.0
Molybdenum (Mo), % 0
0.3 to 0.6
Nickel (Ni), % 0 to 0.5
3.0 to 4.0
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 18 to 20
0 to 0.6
Sulfur (S), % 0
0 to 0.020
Tin (Sn), % 0 to 0.3
0
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.5
0