MakeItFrom.com
Menu (ESC)

392.0 Aluminum vs. SAE-AISI 1019 Steel

392.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1019 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 392.0 aluminum and the bottom bar is SAE-AISI 1019 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 75
190
Elongation at Break, % 0.86
17 to 29
Fatigue Strength, MPa 190
190 to 290
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
73
Tensile Strength: Ultimate (UTS), MPa 290
470 to 520
Tensile Strength: Yield (Proof), MPa 270
250 to 430

Thermal Properties

Latent Heat of Fusion, J/g 670
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 670
1460
Melting Onset (Solidus), °C 580
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 130
52
Thermal Expansion, µm/m-K 19
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 90
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 10
1.8
Density, g/cm3 2.5
7.9
Embodied Carbon, kg CO2/kg material 7.5
1.4
Embodied Energy, MJ/kg 140
18
Embodied Water, L/kg 950
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.4
82 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 490
160 to 500
Stiffness to Weight: Axial, points 17
13
Stiffness to Weight: Bending, points 56
24
Strength to Weight: Axial, points 32
17 to 18
Strength to Weight: Bending, points 39
17 to 18
Thermal Diffusivity, mm2/s 60
14
Thermal Shock Resistance, points 15
15 to 16

Alloy Composition

Aluminum (Al), % 73.9 to 80.6
0
Carbon (C), % 0
0.15 to 0.2
Copper (Cu), % 0.4 to 0.8
0
Iron (Fe), % 0 to 1.5
98.7 to 99.15
Magnesium (Mg), % 0.8 to 1.2
0
Manganese (Mn), % 0.2 to 0.6
0.7 to 1.0
Nickel (Ni), % 0 to 0.5
0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 18 to 20
0
Sulfur (S), % 0
0 to 0.050
Tin (Sn), % 0 to 0.3
0
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.5
0