MakeItFrom.com
Menu (ESC)

413.0 Aluminum vs. EN 1.4611 Stainless Steel

413.0 aluminum belongs to the aluminum alloys classification, while EN 1.4611 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 413.0 aluminum and the bottom bar is EN 1.4611 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 80
180
Elastic (Young's, Tensile) Modulus, GPa 73
200
Elongation at Break, % 2.5
21
Fatigue Strength, MPa 130
180
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 28
78
Shear Strength, MPa 170
330
Tensile Strength: Ultimate (UTS), MPa 270
530
Tensile Strength: Yield (Proof), MPa 140
280

Thermal Properties

Latent Heat of Fusion, J/g 570
290
Maximum Temperature: Mechanical, °C 170
970
Melting Completion (Liquidus), °C 590
1440
Melting Onset (Solidus), °C 580
1390
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 140
21
Thermal Expansion, µm/m-K 20
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 120
3.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
11
Density, g/cm3 2.6
7.7
Embodied Carbon, kg CO2/kg material 7.6
2.5
Embodied Energy, MJ/kg 140
36
Embodied Water, L/kg 1040
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 5.7
91
Resilience: Unit (Modulus of Resilience), kJ/m3 130
190
Stiffness to Weight: Axial, points 16
14
Stiffness to Weight: Bending, points 53
25
Strength to Weight: Axial, points 29
19
Strength to Weight: Bending, points 36
19
Thermal Diffusivity, mm2/s 59
5.7
Thermal Shock Resistance, points 13
18

Alloy Composition

Aluminum (Al), % 82.2 to 89
0 to 0.050
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
19 to 22
Copper (Cu), % 0 to 1.0
0 to 0.5
Iron (Fe), % 0 to 2.0
73.3 to 80.8
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.35
0 to 1.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.5
0 to 0.5
Phosphorus (P), % 0
0 to 0.050
Silicon (Si), % 11 to 13
0 to 1.0
Sulfur (S), % 0
0 to 0.050
Tin (Sn), % 0 to 0.15
0
Titanium (Ti), % 0
0.2 to 1.0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.25
0