MakeItFrom.com
Menu (ESC)

443.0 Aluminum vs. S13800 Stainless Steel

443.0 aluminum belongs to the aluminum alloys classification, while S13800 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 443.0 aluminum and the bottom bar is S13800 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 41
290 to 480
Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 5.6
11 to 18
Fatigue Strength, MPa 55
410 to 870
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Shear Strength, MPa 96
610 to 1030
Tensile Strength: Ultimate (UTS), MPa 150
980 to 1730
Tensile Strength: Yield (Proof), MPa 65
660 to 1580

Thermal Properties

Latent Heat of Fusion, J/g 470
280
Maximum Temperature: Mechanical, °C 180
810
Melting Completion (Liquidus), °C 630
1450
Melting Onset (Solidus), °C 580
1410
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 150
16
Thermal Expansion, µm/m-K 22
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 38
2.3
Electrical Conductivity: Equal Weight (Specific), % IACS 130
2.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
15
Density, g/cm3 2.7
7.9
Embodied Carbon, kg CO2/kg material 8.0
3.4
Embodied Energy, MJ/kg 150
46
Embodied Water, L/kg 1120
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.9
150 to 190
Resilience: Unit (Modulus of Resilience), kJ/m3 30
1090 to 5490
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 52
25
Strength to Weight: Axial, points 16
35 to 61
Strength to Weight: Bending, points 23
28 to 41
Thermal Diffusivity, mm2/s 61
4.3
Thermal Shock Resistance, points 6.9
33 to 58

Alloy Composition

Aluminum (Al), % 90.7 to 95.5
0.9 to 1.4
Carbon (C), % 0
0 to 0.050
Chromium (Cr), % 0 to 0.25
12.3 to 13.2
Copper (Cu), % 0 to 0.6
0
Iron (Fe), % 0 to 0.8
73.6 to 77.3
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.5
0 to 0.2
Molybdenum (Mo), % 0
2.0 to 3.0
Nickel (Ni), % 0
7.5 to 8.5
Nitrogen (N), % 0
0 to 0.010
Phosphorus (P), % 0
0 to 0.010
Silicon (Si), % 4.5 to 6.0
0 to 0.1
Sulfur (S), % 0
0 to 0.0080
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.35
0