MakeItFrom.com
Menu (ESC)

444.0 Aluminum vs. EN 1.4945 Stainless Steel

444.0 aluminum belongs to the aluminum alloys classification, while EN 1.4945 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 444.0 aluminum and the bottom bar is EN 1.4945 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 50
200 to 220
Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 25
19 to 34
Fatigue Strength, MPa 51
230 to 350
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 190
640 to 740
Tensile Strength: Yield (Proof), MPa 83
290 to 550

Thermal Properties

Latent Heat of Fusion, J/g 500
290
Maximum Temperature: Mechanical, °C 170
920
Melting Completion (Liquidus), °C 610
1490
Melting Onset (Solidus), °C 600
1440
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
14
Thermal Expansion, µm/m-K 22
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 140
3.2

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
30
Density, g/cm3 2.6
8.1
Embodied Carbon, kg CO2/kg material 7.9
5.0
Embodied Energy, MJ/kg 150
73
Embodied Water, L/kg 1110
150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 39
130 to 180
Resilience: Unit (Modulus of Resilience), kJ/m3 49
210 to 760
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 53
24
Strength to Weight: Axial, points 20
22 to 25
Strength to Weight: Bending, points 28
20 to 22
Thermal Diffusivity, mm2/s 67
3.7
Thermal Shock Resistance, points 8.8
14 to 16

Alloy Composition

Aluminum (Al), % 90.5 to 93.5
0
Carbon (C), % 0
0.040 to 0.1
Chromium (Cr), % 0
15.5 to 17.5
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 0 to 0.6
57.9 to 65.7
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.35
0 to 1.5
Nickel (Ni), % 0
15.5 to 17.5
Niobium (Nb), % 0
0.4 to 1.2
Nitrogen (N), % 0
0.060 to 0.14
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 6.5 to 7.5
0.3 to 0.6
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.25
0
Tungsten (W), % 0
2.5 to 3.5
Zinc (Zn), % 0 to 0.35
0
Residuals, % 0 to 0.15
0