MakeItFrom.com
Menu (ESC)

444.0 Aluminum vs. EN 1.7233 Steel

444.0 aluminum belongs to the aluminum alloys classification, while EN 1.7233 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 444.0 aluminum and the bottom bar is EN 1.7233 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 50
210 to 290
Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 25
18 to 23
Fatigue Strength, MPa 51
270 to 530
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Tensile Strength: Ultimate (UTS), MPa 190
700 to 960
Tensile Strength: Yield (Proof), MPa 83
380 to 780

Thermal Properties

Latent Heat of Fusion, J/g 500
250
Maximum Temperature: Mechanical, °C 170
430
Melting Completion (Liquidus), °C 610
1460
Melting Onset (Solidus), °C 600
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
39
Thermal Expansion, µm/m-K 22
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
7.4
Electrical Conductivity: Equal Weight (Specific), % IACS 140
8.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
3.0
Density, g/cm3 2.6
7.8
Embodied Carbon, kg CO2/kg material 7.9
1.6
Embodied Energy, MJ/kg 150
21
Embodied Water, L/kg 1110
53

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 39
110 to 200
Resilience: Unit (Modulus of Resilience), kJ/m3 49
380 to 1630
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 53
24
Strength to Weight: Axial, points 20
25 to 34
Strength to Weight: Bending, points 28
22 to 28
Thermal Diffusivity, mm2/s 67
11
Thermal Shock Resistance, points 8.8
21 to 28

Alloy Composition

Aluminum (Al), % 90.5 to 93.5
0
Carbon (C), % 0
0.39 to 0.45
Chromium (Cr), % 0
1.2 to 1.5
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 0 to 0.6
96.2 to 97.5
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.35
0.4 to 0.7
Molybdenum (Mo), % 0
0.5 to 0.7
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 6.5 to 7.5
0 to 0.4
Sulfur (S), % 0
0 to 0.035
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.35
0
Residuals, % 0 to 0.15
0