MakeItFrom.com
Menu (ESC)

5050 Aluminum vs. C12600 Copper

5050 aluminum belongs to the aluminum alloys classification, while C12600 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5050 aluminum and the bottom bar is C12600 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
120
Elongation at Break, % 1.7 to 22
56
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 26
56
Shear Strength, MPa 91 to 140
190
Tensile Strength: Ultimate (UTS), MPa 140 to 250
270
Tensile Strength: Yield (Proof), MPa 50 to 210
69

Thermal Properties

Latent Heat of Fusion, J/g 400
210
Maximum Temperature: Mechanical, °C 180
200
Melting Completion (Liquidus), °C 650
1080
Melting Onset (Solidus), °C 630
1030
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 190
130
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 50
29
Electrical Conductivity: Equal Weight (Specific), % IACS 170
29

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
30
Density, g/cm3 2.7
8.9
Embodied Carbon, kg CO2/kg material 8.4
2.6
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1190
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.1 to 24
110
Resilience: Unit (Modulus of Resilience), kJ/m3 18 to 330
21
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
18
Strength to Weight: Axial, points 15 to 26
8.2
Strength to Weight: Bending, points 22 to 33
10
Thermal Diffusivity, mm2/s 79
39
Thermal Shock Resistance, points 6.3 to 11
9.5

Alloy Composition

Aluminum (Al), % 96.3 to 98.9
0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.2
99.5 to 99.8
Iron (Fe), % 0 to 0.7
0
Magnesium (Mg), % 1.1 to 1.8
0
Manganese (Mn), % 0 to 0.1
0
Phosphorus (P), % 0
0.2 to 0.4
Silicon (Si), % 0 to 0.4
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0