MakeItFrom.com
Menu (ESC)

513.0 Aluminum vs. AISI 201L Stainless Steel

513.0 aluminum belongs to the aluminum alloys classification, while AISI 201L stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 513.0 aluminum and the bottom bar is AISI 201L stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 55
190 to 320
Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 5.7
22 to 46
Fatigue Strength, MPa 97
270 to 530
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
77
Shear Strength, MPa 170
520 to 660
Tensile Strength: Ultimate (UTS), MPa 200
740 to 1040
Tensile Strength: Yield (Proof), MPa 120
290 to 790

Thermal Properties

Latent Heat of Fusion, J/g 390
280
Maximum Temperature: Mechanical, °C 170
880
Melting Completion (Liquidus), °C 640
1410
Melting Onset (Solidus), °C 590
1370
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 130
15
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
12
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.8
2.6
Embodied Energy, MJ/kg 150
38
Embodied Water, L/kg 1170
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 9.8
210 to 300
Resilience: Unit (Modulus of Resilience), kJ/m3 100
220 to 1570
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 20
27 to 37
Strength to Weight: Bending, points 28
24 to 30
Thermal Diffusivity, mm2/s 54
4.0
Thermal Shock Resistance, points 8.8
16 to 23

Alloy Composition

Aluminum (Al), % 91.9 to 95.1
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
16 to 18
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.4
67.9 to 75
Magnesium (Mg), % 3.5 to 4.5
0
Manganese (Mn), % 0 to 0.3
5.5 to 7.5
Nickel (Ni), % 0
3.5 to 5.5
Nitrogen (N), % 0
0 to 0.25
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.3
0 to 0.75
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 1.4 to 2.2
0
Residuals, % 0 to 0.15
0