MakeItFrom.com
Menu (ESC)

513.0 Aluminum vs. EN 1.4983 Stainless Steel

513.0 aluminum belongs to the aluminum alloys classification, while EN 1.4983 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 513.0 aluminum and the bottom bar is EN 1.4983 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 55
190
Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 5.7
40
Fatigue Strength, MPa 97
200
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
78
Shear Strength, MPa 170
430
Tensile Strength: Ultimate (UTS), MPa 200
630
Tensile Strength: Yield (Proof), MPa 120
230

Thermal Properties

Latent Heat of Fusion, J/g 390
290
Maximum Temperature: Mechanical, °C 170
940
Melting Completion (Liquidus), °C 640
1440
Melting Onset (Solidus), °C 590
1400
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 130
15
Thermal Expansion, µm/m-K 24
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
2.3
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
19
Density, g/cm3 2.7
7.9
Embodied Carbon, kg CO2/kg material 8.8
4.1
Embodied Energy, MJ/kg 150
56
Embodied Water, L/kg 1170
150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 9.8
200
Resilience: Unit (Modulus of Resilience), kJ/m3 100
140
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 20
22
Strength to Weight: Bending, points 28
21
Thermal Diffusivity, mm2/s 54
4.0
Thermal Shock Resistance, points 8.8
14

Alloy Composition

Aluminum (Al), % 91.9 to 95.1
0
Boron (B), % 0
0.0015 to 0.0060
Carbon (C), % 0
0.040 to 0.080
Chromium (Cr), % 0
16 to 18
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.4
61.8 to 69.6
Magnesium (Mg), % 3.5 to 4.5
0
Manganese (Mn), % 0 to 0.3
0 to 2.0
Molybdenum (Mo), % 0
2.0 to 2.5
Nickel (Ni), % 0
12 to 14
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.3
0 to 0.75
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.2
0.4 to 0.8
Zinc (Zn), % 1.4 to 2.2
0
Residuals, % 0 to 0.15
0