MakeItFrom.com
Menu (ESC)

513.0 Aluminum vs. S21904 Stainless Steel

513.0 aluminum belongs to the aluminum alloys classification, while S21904 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 513.0 aluminum and the bottom bar is S21904 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 55
210 to 300
Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 5.7
17 to 51
Fatigue Strength, MPa 97
380 to 550
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
78
Shear Strength, MPa 170
510 to 620
Tensile Strength: Ultimate (UTS), MPa 200
700 to 1000
Tensile Strength: Yield (Proof), MPa 120
390 to 910

Thermal Properties

Latent Heat of Fusion, J/g 390
290
Maximum Temperature: Mechanical, °C 170
980
Melting Completion (Liquidus), °C 640
1400
Melting Onset (Solidus), °C 590
1350
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 130
14
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
15
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.8
3.0
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1170
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 9.8
160 to 310
Resilience: Unit (Modulus of Resilience), kJ/m3 100
380 to 2070
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 20
25 to 36
Strength to Weight: Bending, points 28
23 to 29
Thermal Diffusivity, mm2/s 54
3.8
Thermal Shock Resistance, points 8.8
15 to 21

Alloy Composition

Aluminum (Al), % 91.9 to 95.1
0
Carbon (C), % 0
0 to 0.040
Chromium (Cr), % 0
19 to 21.5
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.4
59.5 to 67.4
Magnesium (Mg), % 3.5 to 4.5
0
Manganese (Mn), % 0 to 0.3
8.0 to 10
Nickel (Ni), % 0
5.5 to 7.5
Nitrogen (N), % 0
0.15 to 0.4
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.3
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 1.4 to 2.2
0
Residuals, % 0 to 0.15
0