MakeItFrom.com
Menu (ESC)

520.0 Aluminum vs. EN 1.4306 Stainless Steel

520.0 aluminum belongs to the aluminum alloys classification, while EN 1.4306 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 520.0 aluminum and the bottom bar is EN 1.4306 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 75
190 to 270
Elastic (Young's, Tensile) Modulus, GPa 66
200
Elongation at Break, % 14
14 to 45
Fatigue Strength, MPa 55
190 to 330
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 25
77
Shear Strength, MPa 230
400 to 550
Tensile Strength: Ultimate (UTS), MPa 330
580 to 900
Tensile Strength: Yield (Proof), MPa 170
210 to 570

Thermal Properties

Latent Heat of Fusion, J/g 390
290
Maximum Temperature: Mechanical, °C 170
960
Melting Completion (Liquidus), °C 600
1420
Melting Onset (Solidus), °C 480
1380
Specific Heat Capacity, J/kg-K 910
480
Thermal Conductivity, W/m-K 87
15
Thermal Expansion, µm/m-K 25
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 21
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 72
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
16
Density, g/cm3 2.6
7.8
Embodied Carbon, kg CO2/kg material 9.8
3.2
Embodied Energy, MJ/kg 160
45
Embodied Water, L/kg 1170
150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 39
110 to 200
Resilience: Unit (Modulus of Resilience), kJ/m3 230
110 to 820
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 52
25
Strength to Weight: Axial, points 35
21 to 32
Strength to Weight: Bending, points 41
20 to 27
Thermal Diffusivity, mm2/s 37
4.0
Thermal Shock Resistance, points 14
13 to 20

Alloy Composition

Aluminum (Al), % 87.9 to 90.5
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
18 to 20
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 0 to 0.3
64.8 to 72
Magnesium (Mg), % 9.5 to 10.6
0
Manganese (Mn), % 0 to 0.15
0 to 2.0
Nickel (Ni), % 0
10 to 12
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.25
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.15
0
Residuals, % 0 to 0.15
0