MakeItFrom.com
Menu (ESC)

535.0 Aluminum vs. EN 1.1152 Steel

535.0 aluminum belongs to the aluminum alloys classification, while EN 1.1152 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 535.0 aluminum and the bottom bar is EN 1.1152 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 70
120 to 160
Elastic (Young's, Tensile) Modulus, GPa 67
190
Elongation at Break, % 10
12 to 22
Fatigue Strength, MPa 70
190 to 300
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 25
73
Shear Strength, MPa 190
290 to 340
Tensile Strength: Ultimate (UTS), MPa 270
400 to 550
Tensile Strength: Yield (Proof), MPa 140
270 to 440

Thermal Properties

Latent Heat of Fusion, J/g 390
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 630
1460
Melting Onset (Solidus), °C 570
1420
Specific Heat Capacity, J/kg-K 910
470
Thermal Conductivity, W/m-K 100
52
Thermal Expansion, µm/m-K 24
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 23
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 79
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.8
Density, g/cm3 2.6
7.8
Embodied Carbon, kg CO2/kg material 9.4
1.4
Embodied Energy, MJ/kg 160
18
Embodied Water, L/kg 1180
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24
41 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 150
200 to 530
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 51
24
Strength to Weight: Axial, points 28
14 to 19
Strength to Weight: Bending, points 35
15 to 19
Thermal Diffusivity, mm2/s 42
14
Thermal Shock Resistance, points 12
13 to 17

Alloy Composition

Aluminum (Al), % 91.5 to 93.6
0
Beryllium (Be), % 0.0030 to 0.0070
0
Boron (B), % 0 to 0.0050
0
Carbon (C), % 0
0.18 to 0.22
Copper (Cu), % 0 to 0.050
0 to 0.25
Iron (Fe), % 0 to 0.15
98.6 to 99.52
Magnesium (Mg), % 6.2 to 7.5
0
Manganese (Mn), % 0.1 to 0.25
0.3 to 0.6
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0 to 0.15
0 to 0.3
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0.1 to 0.25
0
Residuals, % 0 to 0.15
0