MakeItFrom.com
Menu (ESC)

5454 Aluminum vs. EN 1.4724 Stainless Steel

5454 aluminum belongs to the aluminum alloys classification, while EN 1.4724 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5454 aluminum and the bottom bar is EN 1.4724 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 61 to 93
170
Elastic (Young's, Tensile) Modulus, GPa 69
190
Elongation at Break, % 2.3 to 18
16
Fatigue Strength, MPa 83 to 160
170
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
75
Shear Strength, MPa 140 to 200
340
Tensile Strength: Ultimate (UTS), MPa 230 to 350
550
Tensile Strength: Yield (Proof), MPa 97 to 290
280

Thermal Properties

Latent Heat of Fusion, J/g 400
290
Maximum Temperature: Mechanical, °C 190
850
Melting Completion (Liquidus), °C 650
1430
Melting Onset (Solidus), °C 600
1390
Specific Heat Capacity, J/kg-K 900
490
Thermal Conductivity, W/m-K 130
21
Thermal Expansion, µm/m-K 24
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
2.3
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
7.0
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.6
2.0
Embodied Energy, MJ/kg 150
28
Embodied Water, L/kg 1180
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.3 to 34
73
Resilience: Unit (Modulus of Resilience), kJ/m3 68 to 590
210
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 23 to 36
20
Strength to Weight: Bending, points 30 to 41
19
Thermal Diffusivity, mm2/s 55
5.6
Thermal Shock Resistance, points 10 to 16
19

Alloy Composition

Aluminum (Al), % 94.5 to 97.1
0.7 to 1.2
Carbon (C), % 0
0 to 0.12
Chromium (Cr), % 0.050 to 0.2
12 to 14
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.4
82.2 to 86.6
Magnesium (Mg), % 2.4 to 3.0
0
Manganese (Mn), % 0.5 to 1.0
0 to 1.0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.25
0.7 to 1.4
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0