6101 Aluminum vs. Grade 702C Zirconium
6101 aluminum belongs to the aluminum alloys classification, while grade 702C zirconium belongs to the otherwise unclassified metals. There are 13 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 6101 aluminum and the bottom bar is grade 702C zirconium.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 68 | |
97 |
Elongation at Break, % | 10 to 25 | |
13 |
Poisson's Ratio | 0.33 | |
0.34 |
Shear Modulus, GPa | 26 | |
36 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
250 |
Specific Heat Capacity, J/kg-K | 900 | |
270 |
Thermal Conductivity, W/m-K | 220 to 230 | |
22 |
Thermal Expansion, µm/m-K | 23 | |
5.7 |
Otherwise Unclassified Properties
Density, g/cm3 | 2.7 | |
6.7 |
Embodied Water, L/kg | 1190 | |
450 |
Common Calculations
Stiffness to Weight: Axial, points | 14 | |
8.1 |
Stiffness to Weight: Bending, points | 50 | |
23 |
Thermal Diffusivity, mm2/s | 89 to 93 | |
12 |
Alloy Composition
Aluminum (Al), % | 97.6 to 99.4 | |
0 |
Boron (B), % | 0 to 0.060 | |
0 |
Carbon (C), % | 0 | |
0 to 0.1 |
Chromium (Cr), % | 0 to 0.030 | |
0 |
Copper (Cu), % | 0 to 0.1 | |
0 |
Hafnium (Hf), % | 0 | |
0 to 4.5 |
Hydrogen (H), % | 0 | |
0 to 0.0050 |
Iron (Fe), % | 0 to 0.5 | |
0 to 0.3 |
Magnesium (Mg), % | 0.35 to 0.8 | |
0 |
Manganese (Mn), % | 0 to 0.030 | |
0 |
Nitrogen (N), % | 0 | |
0 to 0.030 |
Oxygen (O), % | 0 | |
0 to 0.25 |
Phosphorus (P), % | 0 | |
0 to 0.010 |
Silicon (Si), % | 0.3 to 0.7 | |
0 |
Zinc (Zn), % | 0 to 0.1 | |
0 |
Zirconium (Zr), % | 0 | |
94.8 to 100 |
Residuals, % | 0 to 0.1 | |
0 |