MakeItFrom.com
Menu (ESC)

6110A Aluminum vs. AWS ENi-1

6110A aluminum belongs to the aluminum alloys classification, while AWS ENi-1 belongs to the nickel alloys. There are 24 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6110A aluminum and the bottom bar is AWS ENi-1.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
180
Elongation at Break, % 11 to 18
22
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
69
Tensile Strength: Ultimate (UTS), MPa 360 to 470
470

Thermal Properties

Latent Heat of Fusion, J/g 410
310
Melting Completion (Liquidus), °C 650
1360
Melting Onset (Solidus), °C 600
1310
Specific Heat Capacity, J/kg-K 900
450
Thermal Conductivity, W/m-K 160
73
Thermal Expansion, µm/m-K 23
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
19
Electrical Conductivity: Equal Weight (Specific), % IACS 140
19

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
60
Density, g/cm3 2.8
8.7
Embodied Carbon, kg CO2/kg material 8.4
11
Embodied Energy, MJ/kg 150
150
Embodied Water, L/kg 1170
230

Common Calculations

Stiffness to Weight: Axial, points 14
12
Stiffness to Weight: Bending, points 50
22
Strength to Weight: Axial, points 36 to 47
15
Strength to Weight: Bending, points 41 to 48
15
Thermal Diffusivity, mm2/s 65
19
Thermal Shock Resistance, points 16 to 21
17

Alloy Composition

Aluminum (Al), % 94.8 to 98
0 to 1.0
Carbon (C), % 0
0 to 0.1
Chromium (Cr), % 0.050 to 0.25
0
Copper (Cu), % 0.3 to 0.8
0 to 0.25
Iron (Fe), % 0 to 0.5
0 to 0.75
Magnesium (Mg), % 0.7 to 1.1
0
Manganese (Mn), % 0.3 to 0.9
0 to 0.75
Nickel (Ni), % 0
92 to 99
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.7 to 1.1
0 to 1.3
Sulfur (S), % 0
0 to 0.020
Titanium (Ti), % 0 to 0.2
1.0 to 4.0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0 to 0.2
0
Residuals, % 0
0 to 0.5