MakeItFrom.com
Menu (ESC)

6162 Aluminum vs. C22000 Bronze

6162 aluminum belongs to the aluminum alloys classification, while C22000 bronze belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6162 aluminum and the bottom bar is C22000 bronze.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
110
Elongation at Break, % 6.7 to 9.1
1.9 to 45
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
42
Shear Strength, MPa 170 to 180
200 to 300
Tensile Strength: Ultimate (UTS), MPa 290 to 300
260 to 520
Tensile Strength: Yield (Proof), MPa 260 to 270
69 to 500

Thermal Properties

Latent Heat of Fusion, J/g 400
200
Maximum Temperature: Mechanical, °C 160
180
Melting Completion (Liquidus), °C 640
1040
Melting Onset (Solidus), °C 620
1020
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 190
190
Thermal Expansion, µm/m-K 23
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 50
44
Electrical Conductivity: Equal Weight (Specific), % IACS 170
45

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
29
Density, g/cm3 2.7
8.7
Embodied Carbon, kg CO2/kg material 8.3
2.6
Embodied Energy, MJ/kg 150
42
Embodied Water, L/kg 1180
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19 to 26
3.7 to 230
Resilience: Unit (Modulus of Resilience), kJ/m3 510 to 550
21 to 1110
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
18
Strength to Weight: Axial, points 29 to 30
8.1 to 17
Strength to Weight: Bending, points 36
10 to 17
Thermal Diffusivity, mm2/s 79
56
Thermal Shock Resistance, points 13
8.8 to 18

Alloy Composition

Aluminum (Al), % 96.7 to 98.9
0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.2
89 to 91
Iron (Fe), % 0 to 0.5
0 to 0.050
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 0.7 to 1.1
0
Manganese (Mn), % 0 to 0.1
0
Silicon (Si), % 0.4 to 0.8
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
8.7 to 11
Residuals, % 0
0 to 0.2