70Ag-30Ni Alloy vs. 2011A Aluminum
70Ag-30Ni alloy belongs to the otherwise unclassified metals classification, while 2011A aluminum belongs to the aluminum alloys. There are 17 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 70Ag-30Ni alloy and the bottom bar is 2011A aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 100 | |
70 |
Poisson's Ratio | 0.35 | |
0.33 |
Shear Modulus, GPa | 39 | |
26 |
Tensile Strength: Ultimate (UTS), MPa | 320 to 530 | |
310 to 410 |
Thermal Properties
Latent Heat of Fusion, J/g | 170 | |
390 |
Melting Completion (Liquidus), °C | 960 | |
660 |
Melting Onset (Solidus), °C | 960 | |
550 |
Specific Heat Capacity, J/kg-K | 300 | |
870 |
Thermal Expansion, µm/m-K | 17 | |
23 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 69 | |
33 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 62 | |
96 |
Otherwise Unclassified Properties
Density, g/cm3 | 10 | |
3.1 |
Common Calculations
Stiffness to Weight: Axial, points | 5.8 | |
13 |
Stiffness to Weight: Bending, points | 16 | |
44 |
Strength to Weight: Axial, points | 8.8 to 15 | |
28 to 37 |
Strength to Weight: Bending, points | 10 to 15 | |
33 to 40 |
Thermal Shock Resistance, points | 13 to 21 | |
14 to 18 |
Alloy Composition
Aluminum (Al), % | 0 | |
91.5 to 95.1 |
Bismuth (Bi), % | 0 | |
0.2 to 0.6 |
Copper (Cu), % | 0 | |
4.5 to 6.0 |
Iron (Fe), % | 0 | |
0 to 0.5 |
Lead (Pb), % | 0 | |
0.2 to 0.6 |
Nickel (Ni), % | 28.8 to 31 | |
0 |
Silicon (Si), % | 0 | |
0 to 0.4 |
Silver (Ag), % | 69 to 71 | |
0 |
Zinc (Zn), % | 0 | |
0 to 0.3 |
Residuals, % | 0 | |
0 to 0.15 |