MakeItFrom.com
Menu (ESC)

7003 Aluminum vs. EN 1.4526 Stainless Steel

7003 aluminum belongs to the aluminum alloys classification, while EN 1.4526 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7003 aluminum and the bottom bar is EN 1.4526 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 11
25
Fatigue Strength, MPa 130 to 150
230
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 26
77
Shear Strength, MPa 210 to 230
340
Tensile Strength: Ultimate (UTS), MPa 350 to 390
540
Tensile Strength: Yield (Proof), MPa 300 to 310
330

Thermal Properties

Latent Heat of Fusion, J/g 380
280
Maximum Temperature: Mechanical, °C 200
880
Melting Completion (Liquidus), °C 630
1450
Melting Onset (Solidus), °C 510
1410
Specific Heat Capacity, J/kg-K 870
480
Thermal Conductivity, W/m-K 150
30
Thermal Expansion, µm/m-K 24
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 36
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
13
Density, g/cm3 2.9
7.7
Embodied Carbon, kg CO2/kg material 8.1
2.9
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1140
120

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 37 to 41
120
Resilience: Unit (Modulus of Resilience), kJ/m3 630 to 710
280
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 33 to 37
19
Strength to Weight: Bending, points 37 to 40
19
Thermal Diffusivity, mm2/s 59
8.1
Thermal Shock Resistance, points 15 to 17
19

Alloy Composition

Aluminum (Al), % 90.6 to 94.5
0
Carbon (C), % 0
0 to 0.080
Chromium (Cr), % 0 to 0.2
16 to 18
Copper (Cu), % 0 to 0.2
0
Iron (Fe), % 0 to 0.35
77.4 to 83.1
Magnesium (Mg), % 0.5 to 1.0
0
Manganese (Mn), % 0 to 0.3
0 to 1.0
Molybdenum (Mo), % 0
0.8 to 1.4
Niobium (Nb), % 0
0.1 to 1.0
Nitrogen (N), % 0
0 to 0.040
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.3
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 5.0 to 6.5
0
Zirconium (Zr), % 0.050 to 0.25
0
Residuals, % 0 to 0.15
0