MakeItFrom.com
Menu (ESC)

707.0 Aluminum vs. Nickel 600

707.0 aluminum belongs to the aluminum alloys classification, while nickel 600 belongs to the nickel alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 707.0 aluminum and the bottom bar is nickel 600.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 1.7 to 3.4
3.4 to 35
Fatigue Strength, MPa 75 to 140
220 to 300
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
75
Tensile Strength: Ultimate (UTS), MPa 270 to 300
650 to 990
Tensile Strength: Yield (Proof), MPa 170 to 250
270 to 760

Thermal Properties

Latent Heat of Fusion, J/g 380
310
Maximum Temperature: Mechanical, °C 180
1100
Melting Completion (Liquidus), °C 630
1410
Melting Onset (Solidus), °C 600
1350
Specific Heat Capacity, J/kg-K 880
460
Thermal Conductivity, W/m-K 150
14
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 37
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 110
1.8

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
55
Density, g/cm3 2.9
8.5
Embodied Carbon, kg CO2/kg material 8.3
9.0
Embodied Energy, MJ/kg 150
130
Embodied Water, L/kg 1140
250

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.3 to 8.6
31 to 180
Resilience: Unit (Modulus of Resilience), kJ/m3 210 to 430
190 to 1490
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 47
23
Strength to Weight: Axial, points 26 to 29
21 to 32
Strength to Weight: Bending, points 32 to 34
20 to 26
Thermal Diffusivity, mm2/s 58
3.6
Thermal Shock Resistance, points 12 to 13
19 to 29

Alloy Composition

Aluminum (Al), % 90.5 to 93.6
0
Carbon (C), % 0
0 to 0.15
Chromium (Cr), % 0.2 to 0.4
14 to 17
Copper (Cu), % 0 to 0.2
0 to 0.5
Iron (Fe), % 0 to 0.8
6.0 to 10
Magnesium (Mg), % 1.8 to 2.4
0
Manganese (Mn), % 0.4 to 0.6
0 to 1.0
Nickel (Ni), % 0
72 to 80
Silicon (Si), % 0 to 0.2
0 to 0.5
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 4.0 to 4.5
0
Residuals, % 0 to 0.15
0