MakeItFrom.com
Menu (ESC)

710.0 Aluminum vs. AISI 415 Stainless Steel

710.0 aluminum belongs to the aluminum alloys classification, while AISI 415 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 710.0 aluminum and the bottom bar is AISI 415 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 75
260
Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 2.2 to 3.6
17
Fatigue Strength, MPa 55 to 110
430
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 26
76
Shear Strength, MPa 180
550
Tensile Strength: Ultimate (UTS), MPa 240 to 250
900
Tensile Strength: Yield (Proof), MPa 160
700

Thermal Properties

Latent Heat of Fusion, J/g 380
270
Maximum Temperature: Mechanical, °C 170
780
Melting Completion (Liquidus), °C 650
1450
Melting Onset (Solidus), °C 610
1400
Specific Heat Capacity, J/kg-K 870
480
Thermal Conductivity, W/m-K 140
24
Thermal Expansion, µm/m-K 24
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
2.7
Electrical Conductivity: Equal Weight (Specific), % IACS 110
3.1

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
11
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.0
2.5
Embodied Energy, MJ/kg 150
35
Embodied Water, L/kg 1130
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.9 to 7.9
140
Resilience: Unit (Modulus of Resilience), kJ/m3 180 to 190
1250
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
25
Strength to Weight: Axial, points 23
32
Strength to Weight: Bending, points 29
26
Thermal Diffusivity, mm2/s 53
6.4
Thermal Shock Resistance, points 10 to 11
33

Alloy Composition

Aluminum (Al), % 90.5 to 93.1
0
Carbon (C), % 0
0 to 0.050
Chromium (Cr), % 0
11.5 to 14
Copper (Cu), % 0.35 to 0.65
0
Iron (Fe), % 0 to 0.5
77.8 to 84
Magnesium (Mg), % 0.6 to 0.8
0
Manganese (Mn), % 0 to 0.050
0.5 to 1.0
Molybdenum (Mo), % 0
0.5 to 1.0
Nickel (Ni), % 0
3.5 to 5.5
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.15
0 to 0.6
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 6.0 to 7.0
0
Residuals, % 0 to 0.15
0