MakeItFrom.com
Menu (ESC)

710.0 Aluminum vs. C36000 Brass

710.0 aluminum belongs to the aluminum alloys classification, while C36000 brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 710.0 aluminum and the bottom bar is C36000 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
100
Elongation at Break, % 2.2 to 3.6
5.8 to 23
Poisson's Ratio 0.32
0.31
Shear Modulus, GPa 26
39
Shear Strength, MPa 180
210 to 310
Tensile Strength: Ultimate (UTS), MPa 240 to 250
330 to 530
Tensile Strength: Yield (Proof), MPa 160
140 to 260

Thermal Properties

Latent Heat of Fusion, J/g 380
170
Maximum Temperature: Mechanical, °C 170
120
Melting Completion (Liquidus), °C 650
900
Melting Onset (Solidus), °C 610
890
Specific Heat Capacity, J/kg-K 870
380
Thermal Conductivity, W/m-K 140
120
Thermal Expansion, µm/m-K 24
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
26
Electrical Conductivity: Equal Weight (Specific), % IACS 110
29

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
23
Density, g/cm3 3.0
8.2
Embodied Carbon, kg CO2/kg material 8.0
2.6
Embodied Energy, MJ/kg 150
45
Embodied Water, L/kg 1130
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.9 to 7.9
25 to 62
Resilience: Unit (Modulus of Resilience), kJ/m3 180 to 190
89 to 340
Stiffness to Weight: Axial, points 13
7.0
Stiffness to Weight: Bending, points 46
19
Strength to Weight: Axial, points 23
11 to 18
Strength to Weight: Bending, points 29
13 to 18
Thermal Diffusivity, mm2/s 53
37
Thermal Shock Resistance, points 10 to 11
11 to 18

Alloy Composition

Aluminum (Al), % 90.5 to 93.1
0
Copper (Cu), % 0.35 to 0.65
60 to 63
Iron (Fe), % 0 to 0.5
0 to 0.35
Lead (Pb), % 0
2.5 to 3.7
Magnesium (Mg), % 0.6 to 0.8
0
Manganese (Mn), % 0 to 0.050
0
Silicon (Si), % 0 to 0.15
0
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 6.0 to 7.0
32.5 to 37.5
Residuals, % 0
0 to 0.5