MakeItFrom.com
Menu (ESC)

710.0 Aluminum vs. C70620 Copper-nickel

710.0 aluminum belongs to the aluminum alloys classification, while C70620 copper-nickel belongs to the copper alloys. There are 22 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 710.0 aluminum and the bottom bar is C70620 copper-nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
120
Poisson's Ratio 0.32
0.34
Shear Modulus, GPa 26
46
Tensile Strength: Ultimate (UTS), MPa 240 to 250
300 to 570

Thermal Properties

Latent Heat of Fusion, J/g 380
220
Maximum Temperature: Mechanical, °C 170
220
Melting Completion (Liquidus), °C 650
1120
Melting Onset (Solidus), °C 610
1060
Specific Heat Capacity, J/kg-K 870
390
Thermal Conductivity, W/m-K 140
49
Thermal Expansion, µm/m-K 24
17

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
33
Density, g/cm3 3.0
8.9
Embodied Carbon, kg CO2/kg material 8.0
3.4
Embodied Energy, MJ/kg 150
51
Embodied Water, L/kg 1130
300

Common Calculations

Stiffness to Weight: Axial, points 13
7.7
Stiffness to Weight: Bending, points 46
19
Strength to Weight: Axial, points 23
9.3 to 18
Strength to Weight: Bending, points 29
11 to 17
Thermal Diffusivity, mm2/s 53
14
Thermal Shock Resistance, points 10 to 11
10 to 20

Alloy Composition

Aluminum (Al), % 90.5 to 93.1
0
Carbon (C), % 0
0 to 0.050
Copper (Cu), % 0.35 to 0.65
86.5 to 90
Iron (Fe), % 0 to 0.5
1.0 to 1.8
Lead (Pb), % 0
0 to 0.020
Magnesium (Mg), % 0.6 to 0.8
0
Manganese (Mn), % 0 to 0.050
0 to 1.0
Nickel (Ni), % 0
9.0 to 11
Phosphorus (P), % 0
0 to 0.2
Silicon (Si), % 0 to 0.15
0
Sulfur (S), % 0
0 to 0.020
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 6.0 to 7.0
0 to 0.5
Residuals, % 0
0 to 0.5