MakeItFrom.com
Menu (ESC)

710.0 Aluminum vs. C73100 Nickel Silver

710.0 aluminum belongs to the aluminum alloys classification, while C73100 nickel silver belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 710.0 aluminum and the bottom bar is C73100 nickel silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
110
Elongation at Break, % 2.2 to 3.6
3.4 to 8.0
Poisson's Ratio 0.32
0.32
Shear Modulus, GPa 26
43
Shear Strength, MPa 180
260 to 370
Tensile Strength: Ultimate (UTS), MPa 240 to 250
450 to 640
Tensile Strength: Yield (Proof), MPa 160
420 to 590

Thermal Properties

Latent Heat of Fusion, J/g 380
190
Maximum Temperature: Mechanical, °C 170
170
Melting Completion (Liquidus), °C 650
1030
Melting Onset (Solidus), °C 610
1000
Specific Heat Capacity, J/kg-K 870
390
Thermal Conductivity, W/m-K 140
35
Thermal Expansion, µm/m-K 24
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
7.5
Electrical Conductivity: Equal Weight (Specific), % IACS 110
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
28
Density, g/cm3 3.0
8.4
Embodied Carbon, kg CO2/kg material 8.0
3.0
Embodied Energy, MJ/kg 150
49
Embodied Water, L/kg 1130
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.9 to 7.9
21 to 35
Resilience: Unit (Modulus of Resilience), kJ/m3 180 to 190
790 to 1560
Stiffness to Weight: Axial, points 13
7.5
Stiffness to Weight: Bending, points 46
19
Strength to Weight: Axial, points 23
15 to 21
Strength to Weight: Bending, points 29
15 to 20
Thermal Diffusivity, mm2/s 53
11
Thermal Shock Resistance, points 10 to 11
15 to 21

Alloy Composition

Aluminum (Al), % 90.5 to 93.1
0
Copper (Cu), % 0.35 to 0.65
70.8 to 78
Iron (Fe), % 0 to 0.5
0 to 0.1
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 0.6 to 0.8
0
Manganese (Mn), % 0 to 0.050
0 to 0.5
Nickel (Ni), % 0
4.0 to 6.0
Silicon (Si), % 0 to 0.15
0
Tin (Sn), % 0
0 to 0.1
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 6.0 to 7.0
18 to 22
Residuals, % 0
0 to 0.5