MakeItFrom.com
Menu (ESC)

711.0 Aluminum vs. SAE-AISI 4150 Steel

711.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI 4150 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 711.0 aluminum and the bottom bar is SAE-AISI 4150 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 70
200 to 380
Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 7.8
12 to 20
Fatigue Strength, MPa 100
260 to 780
Poisson's Ratio 0.32
0.29
Shear Modulus, GPa 27
73
Tensile Strength: Ultimate (UTS), MPa 220
660 to 1310
Tensile Strength: Yield (Proof), MPa 140
380 to 1220

Thermal Properties

Latent Heat of Fusion, J/g 380
250
Maximum Temperature: Mechanical, °C 170
420
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 610
1420
Specific Heat Capacity, J/kg-K 860
470
Thermal Conductivity, W/m-K 160
42
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
7.3
Electrical Conductivity: Equal Weight (Specific), % IACS 120
8.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
2.4
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 7.9
1.5
Embodied Energy, MJ/kg 150
20
Embodied Water, L/kg 1120
51

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 15
82 to 180
Resilience: Unit (Modulus of Resilience), kJ/m3 140
380 to 3930
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
24
Strength to Weight: Axial, points 20
24 to 47
Strength to Weight: Bending, points 26
22 to 34
Thermal Diffusivity, mm2/s 61
11
Thermal Shock Resistance, points 9.3
19 to 39

Alloy Composition

Aluminum (Al), % 89.8 to 92.7
0
Carbon (C), % 0
0.48 to 0.53
Chromium (Cr), % 0
0.8 to 1.1
Copper (Cu), % 0.35 to 0.65
0
Iron (Fe), % 0.7 to 1.4
96.7 to 97.7
Magnesium (Mg), % 0.25 to 0.45
0
Manganese (Mn), % 0 to 0.050
0.75 to 1.0
Molybdenum (Mo), % 0
0.15 to 0.25
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.3
0.15 to 0.35
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 6.0 to 7.0
0
Residuals, % 0 to 0.15
0