MakeItFrom.com
Menu (ESC)

713.0 Aluminum vs. Grade N12MV Nickel

713.0 aluminum belongs to the aluminum alloys classification, while grade N12MV nickel belongs to the nickel alloys. There are 25 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 713.0 aluminum and the bottom bar is grade N12MV nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
220
Elongation at Break, % 3.9 to 4.3
6.8
Fatigue Strength, MPa 63 to 120
130
Poisson's Ratio 0.32
0.31
Shear Modulus, GPa 27
84
Tensile Strength: Ultimate (UTS), MPa 240 to 260
600
Tensile Strength: Yield (Proof), MPa 170
310

Thermal Properties

Latent Heat of Fusion, J/g 370
320
Maximum Temperature: Mechanical, °C 180
900
Melting Completion (Liquidus), °C 630
1620
Melting Onset (Solidus), °C 610
1570
Specific Heat Capacity, J/kg-K 860
390
Thermal Expansion, µm/m-K 24
10

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
75
Density, g/cm3 3.1
9.2
Embodied Carbon, kg CO2/kg material 7.8
16
Embodied Energy, MJ/kg 150
200
Embodied Water, L/kg 1110
260

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 8.7 to 9.9
34
Resilience: Unit (Modulus of Resilience), kJ/m3 210 to 220
220
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
22
Strength to Weight: Axial, points 22 to 23
18
Strength to Weight: Bending, points 28 to 29
17
Thermal Shock Resistance, points 10 to 11
19

Alloy Composition

Aluminum (Al), % 87.6 to 92.4
0
Carbon (C), % 0
0 to 0.12
Chromium (Cr), % 0 to 0.35
0 to 1.0
Copper (Cu), % 0.4 to 1.0
0
Iron (Fe), % 0 to 1.1
4.0 to 6.0
Magnesium (Mg), % 0.2 to 0.5
0
Manganese (Mn), % 0 to 0.6
0 to 1.0
Molybdenum (Mo), % 0
26 to 30
Nickel (Ni), % 0 to 0.15
60.2 to 69.8
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.25
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Vanadium (V), % 0
0.2 to 0.6
Zinc (Zn), % 7.0 to 8.0
0
Residuals, % 0 to 0.25
0