MakeItFrom.com
Menu (ESC)

713.0 Aluminum vs. S45500 Stainless Steel

713.0 aluminum belongs to the aluminum alloys classification, while S45500 stainless steel belongs to the iron alloys. There are 26 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 713.0 aluminum and the bottom bar is S45500 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 74 to 75
280 to 500
Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 3.9 to 4.3
3.4 to 11
Fatigue Strength, MPa 63 to 120
570 to 890
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
75
Shear Strength, MPa 180
790 to 1090
Tensile Strength: Ultimate (UTS), MPa 240 to 260
1370 to 1850
Tensile Strength: Yield (Proof), MPa 170
1240 to 1700

Thermal Properties

Latent Heat of Fusion, J/g 370
270
Maximum Temperature: Mechanical, °C 180
760
Melting Completion (Liquidus), °C 630
1440
Melting Onset (Solidus), °C 610
1400
Specific Heat Capacity, J/kg-K 860
470
Thermal Expansion, µm/m-K 24
11

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
17
Density, g/cm3 3.1
7.9
Embodied Carbon, kg CO2/kg material 7.8
3.8
Embodied Energy, MJ/kg 150
57
Embodied Water, L/kg 1110
120

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 8.7 to 9.9
45 to 190
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 45
24
Strength to Weight: Axial, points 22 to 23
48 to 65
Strength to Weight: Bending, points 28 to 29
35 to 42
Thermal Shock Resistance, points 10 to 11
48 to 64

Alloy Composition

Aluminum (Al), % 87.6 to 92.4
0
Carbon (C), % 0
0 to 0.050
Chromium (Cr), % 0 to 0.35
11 to 12.5
Copper (Cu), % 0.4 to 1.0
1.5 to 2.5
Iron (Fe), % 0 to 1.1
71.5 to 79.2
Magnesium (Mg), % 0.2 to 0.5
0
Manganese (Mn), % 0 to 0.6
0 to 0.5
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.15
7.5 to 9.5
Niobium (Nb), % 0
0 to 0.5
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.25
0 to 0.5
Sulfur (S), % 0
0 to 0.030
Tantalum (Ta), % 0
0 to 0.5
Titanium (Ti), % 0 to 0.25
0.8 to 1.4
Zinc (Zn), % 7.0 to 8.0
0
Residuals, % 0 to 0.25
0