MakeItFrom.com
Menu (ESC)

772.0 Aluminum vs. ACI-ASTM CA15M Steel

772.0 aluminum belongs to the aluminum alloys classification, while ACI-ASTM CA15M steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 772.0 aluminum and the bottom bar is ACI-ASTM CA15M steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
200
Elongation at Break, % 6.3 to 8.4
20
Fatigue Strength, MPa 94 to 160
330
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 26
76
Tensile Strength: Ultimate (UTS), MPa 260 to 320
690
Tensile Strength: Yield (Proof), MPa 220 to 250
510

Thermal Properties

Latent Heat of Fusion, J/g 380
270
Maximum Temperature: Mechanical, °C 180
760
Melting Completion (Liquidus), °C 630
1450
Melting Onset (Solidus), °C 580
1410
Specific Heat Capacity, J/kg-K 870
480
Thermal Conductivity, W/m-K 150
27
Thermal Expansion, µm/m-K 24
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
3.0
Electrical Conductivity: Equal Weight (Specific), % IACS 110
3.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
7.5
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.0
2.1
Embodied Energy, MJ/kg 150
29
Embodied Water, L/kg 1140
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 16 to 25
130
Resilience: Unit (Modulus of Resilience), kJ/m3 350 to 430
670
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
25
Strength to Weight: Axial, points 25 to 31
25
Strength to Weight: Bending, points 31 to 36
22
Thermal Diffusivity, mm2/s 58
7.2
Thermal Shock Resistance, points 11 to 14
25

Alloy Composition

Aluminum (Al), % 91.2 to 93.2
0
Carbon (C), % 0
0 to 0.15
Chromium (Cr), % 0.060 to 0.2
11.5 to 14
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.15
82.1 to 88.4
Magnesium (Mg), % 0.6 to 0.8
0
Manganese (Mn), % 0 to 0.1
0 to 1.0
Molybdenum (Mo), % 0
0.15 to 1.0
Nickel (Ni), % 0
0 to 1.0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.15
0 to 0.65
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0.1 to 0.2
0
Zinc (Zn), % 6.0 to 7.0
0
Residuals, % 0 to 0.15
0