MakeItFrom.com
Menu (ESC)

A357.0 Aluminum vs. R05240 Alloy

A357.0 aluminum belongs to the aluminum alloys classification, while R05240 alloy belongs to the otherwise unclassified metals. There are 18 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is A357.0 aluminum and the bottom bar is R05240 alloy.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
150
Elongation at Break, % 3.7
25
Poisson's Ratio 0.33
0.36
Shear Modulus, GPa 26
57
Tensile Strength: Ultimate (UTS), MPa 350
270
Tensile Strength: Yield (Proof), MPa 270
170

Thermal Properties

Latent Heat of Fusion, J/g 500
210
Specific Heat Capacity, J/kg-K 900
190
Thermal Expansion, µm/m-K 21
6.8

Otherwise Unclassified Properties

Density, g/cm3 2.6
14
Embodied Water, L/kg 1110
460

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12
59
Resilience: Unit (Modulus of Resilience), kJ/m3 520
90
Stiffness to Weight: Axial, points 15
6.3
Stiffness to Weight: Bending, points 53
13
Strength to Weight: Axial, points 38
5.4
Strength to Weight: Bending, points 43
6.8
Thermal Shock Resistance, points 17
18

Alloy Composition

Aluminum (Al), % 90.8 to 93
0
Beryllium (Be), % 0.040 to 0.070
0
Carbon (C), % 0
0 to 0.010
Copper (Cu), % 0 to 0.2
0
Hydrogen (H), % 0
0 to 0.0015
Iron (Fe), % 0 to 0.2
0 to 0.010
Magnesium (Mg), % 0.4 to 0.7
0
Manganese (Mn), % 0 to 0.1
0
Molybdenum (Mo), % 0
0 to 0.020
Nickel (Ni), % 0
0 to 0.010
Niobium (Nb), % 0
35 to 42
Nitrogen (N), % 0
0 to 0.010
Oxygen (O), % 0
0 to 0.020
Silicon (Si), % 6.5 to 7.5
0 to 0.0050
Tantalum (Ta), % 0
57.9 to 65
Titanium (Ti), % 0.040 to 0.2
0 to 0.010
Tungsten (W), % 0
0 to 0.050
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0