MakeItFrom.com
Menu (ESC)

A360.0 Aluminum vs. EN 1.4567 Stainless Steel

A360.0 aluminum belongs to the aluminum alloys classification, while EN 1.4567 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is A360.0 aluminum and the bottom bar is EN 1.4567 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 75
190 to 240
Elastic (Young's, Tensile) Modulus, GPa 72
190
Elongation at Break, % 1.6 to 5.0
22 to 51
Fatigue Strength, MPa 82 to 150
190 to 260
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
76
Shear Strength, MPa 180
390 to 490
Tensile Strength: Ultimate (UTS), MPa 180 to 320
550 to 780
Tensile Strength: Yield (Proof), MPa 170 to 260
200 to 390

Thermal Properties

Latent Heat of Fusion, J/g 530
290
Maximum Temperature: Mechanical, °C 170
930
Melting Completion (Liquidus), °C 680
1410
Melting Onset (Solidus), °C 590
1370
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 110
11
Thermal Expansion, µm/m-K 21
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 100
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
16
Density, g/cm3 2.6
7.8
Embodied Carbon, kg CO2/kg material 7.8
3.1
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1070
150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.6 to 13
150 to 220
Resilience: Unit (Modulus of Resilience), kJ/m3 190 to 470
100 to 400
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 53
25
Strength to Weight: Axial, points 19 to 34
19 to 27
Strength to Weight: Bending, points 27 to 39
19 to 24
Thermal Diffusivity, mm2/s 48
3.0
Thermal Shock Resistance, points 8.5 to 15
12 to 17

Alloy Composition

Aluminum (Al), % 85.8 to 90.6
0
Carbon (C), % 0
0 to 0.040
Chromium (Cr), % 0
17 to 19
Copper (Cu), % 0 to 0.6
3.0 to 4.0
Iron (Fe), % 0 to 1.3
63.3 to 71.5
Magnesium (Mg), % 0.4 to 0.6
0
Manganese (Mn), % 0 to 0.35
0 to 2.0
Nickel (Ni), % 0 to 0.5
8.5 to 10.5
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 9.0 to 10
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Tin (Sn), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.25
0