MakeItFrom.com
Menu (ESC)

A360.0 Aluminum vs. C72800 Copper-nickel

A360.0 aluminum belongs to the aluminum alloys classification, while C72800 copper-nickel belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is A360.0 aluminum and the bottom bar is C72800 copper-nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
120
Elongation at Break, % 1.6 to 5.0
3.9 to 23
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 27
44
Shear Strength, MPa 180
330 to 740
Tensile Strength: Ultimate (UTS), MPa 180 to 320
520 to 1270
Tensile Strength: Yield (Proof), MPa 170 to 260
250 to 1210

Thermal Properties

Latent Heat of Fusion, J/g 530
210
Maximum Temperature: Mechanical, °C 170
200
Melting Completion (Liquidus), °C 680
1080
Melting Onset (Solidus), °C 590
920
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 110
55
Thermal Expansion, µm/m-K 21
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30
11
Electrical Conductivity: Equal Weight (Specific), % IACS 100
11

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
38
Density, g/cm3 2.6
8.8
Embodied Carbon, kg CO2/kg material 7.8
4.4
Embodied Energy, MJ/kg 150
68
Embodied Water, L/kg 1070
360

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.6 to 13
37 to 99
Resilience: Unit (Modulus of Resilience), kJ/m3 190 to 470
260 to 5650
Stiffness to Weight: Axial, points 15
7.4
Stiffness to Weight: Bending, points 53
19
Strength to Weight: Axial, points 19 to 34
17 to 40
Strength to Weight: Bending, points 27 to 39
16 to 30
Thermal Diffusivity, mm2/s 48
17
Thermal Shock Resistance, points 8.5 to 15
19 to 45

Alloy Composition

Aluminum (Al), % 85.8 to 90.6
0 to 0.1
Antimony (Sb), % 0
0 to 0.020
Bismuth (Bi), % 0
0 to 0.0010
Boron (B), % 0
0 to 0.0010
Copper (Cu), % 0 to 0.6
78.3 to 82.8
Iron (Fe), % 0 to 1.3
0 to 0.5
Lead (Pb), % 0
0 to 0.0050
Magnesium (Mg), % 0.4 to 0.6
0.0050 to 0.15
Manganese (Mn), % 0 to 0.35
0.050 to 0.3
Nickel (Ni), % 0 to 0.5
9.5 to 10.5
Niobium (Nb), % 0
0.1 to 0.3
Phosphorus (P), % 0
0 to 0.0050
Silicon (Si), % 9.0 to 10
0 to 0.050
Sulfur (S), % 0
0 to 0.0025
Tin (Sn), % 0 to 0.15
7.5 to 8.5
Titanium (Ti), % 0
0 to 0.010
Zinc (Zn), % 0 to 0.5
0 to 1.0
Residuals, % 0
0 to 0.3