MakeItFrom.com
Menu (ESC)

A380.0 Aluminum vs. EN 1.4611 Stainless Steel

A380.0 aluminum belongs to the aluminum alloys classification, while EN 1.4611 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is A380.0 aluminum and the bottom bar is EN 1.4611 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 80
180
Elastic (Young's, Tensile) Modulus, GPa 73
200
Elongation at Break, % 3.3
21
Fatigue Strength, MPa 140
180
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 27
78
Shear Strength, MPa 190
330
Tensile Strength: Ultimate (UTS), MPa 290
530
Tensile Strength: Yield (Proof), MPa 160
280

Thermal Properties

Latent Heat of Fusion, J/g 510
290
Maximum Temperature: Mechanical, °C 170
970
Melting Completion (Liquidus), °C 590
1440
Melting Onset (Solidus), °C 550
1390
Specific Heat Capacity, J/kg-K 870
480
Thermal Conductivity, W/m-K 96
21
Thermal Expansion, µm/m-K 22
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 78
3.0

Otherwise Unclassified Properties

Base Metal Price, % relative 11
11
Density, g/cm3 2.9
7.7
Embodied Carbon, kg CO2/kg material 7.5
2.5
Embodied Energy, MJ/kg 140
36
Embodied Water, L/kg 1040
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 8.3
91
Resilience: Unit (Modulus of Resilience), kJ/m3 180
190
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 48
25
Strength to Weight: Axial, points 28
19
Strength to Weight: Bending, points 34
19
Thermal Diffusivity, mm2/s 38
5.7
Thermal Shock Resistance, points 13
18

Alloy Composition

Aluminum (Al), % 80.3 to 89.5
0 to 0.050
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
19 to 22
Copper (Cu), % 3.0 to 4.0
0 to 0.5
Iron (Fe), % 0 to 1.3
73.3 to 80.8
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.5
0 to 1.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.5
0 to 0.5
Phosphorus (P), % 0
0 to 0.050
Silicon (Si), % 7.5 to 9.5
0 to 1.0
Sulfur (S), % 0
0 to 0.050
Tin (Sn), % 0 to 0.35
0
Titanium (Ti), % 0
0.2 to 1.0
Zinc (Zn), % 0 to 3.0
0
Residuals, % 0 to 0.5
0