MakeItFrom.com
Menu (ESC)

A390.0 Aluminum vs. Nickel 690

A390.0 aluminum belongs to the aluminum alloys classification, while nickel 690 belongs to the nickel alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is A390.0 aluminum and the bottom bar is nickel 690.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110 to 140
90
Elastic (Young's, Tensile) Modulus, GPa 75
200
Elongation at Break, % 0.87 to 0.91
3.4 to 34
Fatigue Strength, MPa 70 to 100
180 to 300
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 28
79
Tensile Strength: Ultimate (UTS), MPa 190 to 290
640 to 990
Tensile Strength: Yield (Proof), MPa 190 to 290
250 to 760

Thermal Properties

Latent Heat of Fusion, J/g 640
320
Maximum Temperature: Mechanical, °C 170
1010
Melting Completion (Liquidus), °C 580
1380
Melting Onset (Solidus), °C 480
1340
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 130
14
Thermal Expansion, µm/m-K 20
14

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 20
1.5
Electrical Conductivity: Equal Weight (Specific), % IACS 67
1.6

Otherwise Unclassified Properties

Base Metal Price, % relative 11
50
Density, g/cm3 2.7
8.3
Embodied Carbon, kg CO2/kg material 7.3
8.2
Embodied Energy, MJ/kg 140
120
Embodied Water, L/kg 950
290

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 1.6 to 2.6
31 to 170
Resilience: Unit (Modulus of Resilience), kJ/m3 240 to 580
160 to 1440
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 52
24
Strength to Weight: Axial, points 19 to 30
21 to 33
Strength to Weight: Bending, points 27 to 36
20 to 27
Thermal Diffusivity, mm2/s 56
3.5
Thermal Shock Resistance, points 9.0 to 14
16 to 25

Alloy Composition

Aluminum (Al), % 75.3 to 79.6
0
Carbon (C), % 0
0 to 0.050
Chromium (Cr), % 0
27 to 31
Copper (Cu), % 4.0 to 5.0
0 to 0.5
Iron (Fe), % 0 to 0.5
7.0 to 11
Magnesium (Mg), % 0.45 to 0.65
0
Manganese (Mn), % 0 to 0.1
0 to 0.5
Nickel (Ni), % 0
58 to 66
Silicon (Si), % 16 to 18
0 to 0.5
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.2
0