MakeItFrom.com
Menu (ESC)

AZ63A Magnesium vs. Commercially Pure Silver

AZ63A magnesium belongs to the magnesium alloys classification, while commercially pure silver belongs to the otherwise unclassified metals. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AZ63A magnesium and the bottom bar is commercially pure silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 46
71
Elongation at Break, % 2.2 to 8.0
1.1 to 29
Poisson's Ratio 0.29
0.37
Shear Modulus, GPa 18
26
Shear Strength, MPa 110 to 160
120 to 190
Tensile Strength: Ultimate (UTS), MPa 190 to 270
190 to 340

Thermal Properties

Latent Heat of Fusion, J/g 350
110
Melting Completion (Liquidus), °C 610
960
Melting Onset (Solidus), °C 450
960
Specific Heat Capacity, J/kg-K 980
240
Thermal Conductivity, W/m-K 52 to 65
420
Thermal Expansion, µm/m-K 26
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 12 to 15
100
Electrical Conductivity: Equal Weight (Specific), % IACS 59 to 74
87

Otherwise Unclassified Properties

Density, g/cm3 1.8
10

Common Calculations

Stiffness to Weight: Axial, points 14
3.8
Stiffness to Weight: Bending, points 66
13
Strength to Weight: Axial, points 29 to 41
4.9 to 8.9
Strength to Weight: Bending, points 40 to 51
6.9 to 10
Thermal Diffusivity, mm2/s 29 to 37
170
Thermal Shock Resistance, points 11 to 16
9.5 to 17

Alloy Composition

Aluminum (Al), % 5.3 to 6.7
0
Copper (Cu), % 0 to 0.25
0
Magnesium (Mg), % 88.6 to 92.1
0
Manganese (Mn), % 0.15 to 0.35
0
Nickel (Ni), % 0 to 0.010
0
Silicon (Si), % 0 to 0.3
0
Silver (Ag), % 0
99.9 to 100
Zinc (Zn), % 2.5 to 3.5
0
Residuals, % 0
0 to 0.1