MakeItFrom.com
Menu (ESC)

B443.0 Aluminum vs. S20161 Stainless Steel

B443.0 aluminum belongs to the aluminum alloys classification, while S20161 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is B443.0 aluminum and the bottom bar is S20161 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 43
250
Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 4.9
46
Fatigue Strength, MPa 55
360
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
76
Shear Strength, MPa 110
690
Tensile Strength: Ultimate (UTS), MPa 150
980
Tensile Strength: Yield (Proof), MPa 50
390

Thermal Properties

Latent Heat of Fusion, J/g 470
330
Maximum Temperature: Mechanical, °C 170
870
Melting Completion (Liquidus), °C 620
1380
Melting Onset (Solidus), °C 600
1330
Specific Heat Capacity, J/kg-K 900
490
Thermal Conductivity, W/m-K 150
15
Thermal Expansion, µm/m-K 22
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 38
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 130
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
12
Density, g/cm3 2.7
7.5
Embodied Carbon, kg CO2/kg material 8.0
2.7
Embodied Energy, MJ/kg 150
39
Embodied Water, L/kg 1130
130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 5.6
360
Resilience: Unit (Modulus of Resilience), kJ/m3 18
390
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 52
26
Strength to Weight: Axial, points 15
36
Strength to Weight: Bending, points 23
29
Thermal Diffusivity, mm2/s 61
4.0
Thermal Shock Resistance, points 6.8
22

Alloy Composition

Aluminum (Al), % 91.9 to 95.5
0
Carbon (C), % 0
0 to 0.15
Chromium (Cr), % 0
15 to 18
Copper (Cu), % 0 to 0.15
0
Iron (Fe), % 0 to 0.8
65.6 to 73.9
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.35
4.0 to 6.0
Nickel (Ni), % 0
4.0 to 6.0
Nitrogen (N), % 0
0.080 to 0.2
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 4.5 to 6.0
3.0 to 4.0
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.35
0
Residuals, % 0 to 0.15
0