MakeItFrom.com
Menu (ESC)

Commercially Pure Silver vs. EN-MC21210 Magnesium

Commercially pure silver belongs to the otherwise unclassified metals classification, while EN-MC21210 magnesium belongs to the magnesium alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is commercially pure silver and the bottom bar is EN-MC21210 magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
44
Elongation at Break, % 1.1 to 29
14
Poisson's Ratio 0.37
0.29
Shear Modulus, GPa 26
17
Shear Strength, MPa 120 to 190
110
Tensile Strength: Ultimate (UTS), MPa 190 to 340
190

Thermal Properties

Latent Heat of Fusion, J/g 110
350
Melting Completion (Liquidus), °C 960
600
Melting Onset (Solidus), °C 960
570
Specific Heat Capacity, J/kg-K 240
1000
Thermal Conductivity, W/m-K 420
120
Thermal Expansion, µm/m-K 20
27

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 100
24
Electrical Conductivity: Equal Weight (Specific), % IACS 87
130

Otherwise Unclassified Properties

Density, g/cm3 10
1.6

Common Calculations

Stiffness to Weight: Axial, points 3.8
15
Stiffness to Weight: Bending, points 13
72
Strength to Weight: Axial, points 4.9 to 8.9
32
Strength to Weight: Bending, points 6.9 to 10
44
Thermal Diffusivity, mm2/s 170
76
Thermal Shock Resistance, points 9.5 to 17
11

Alloy Composition

Aluminum (Al), % 0
1.6 to 2.6
Copper (Cu), % 0
0 to 0.010
Iron (Fe), % 0
0 to 0.0050
Magnesium (Mg), % 0
96.3 to 98.3
Manganese (Mn), % 0
0.1 to 0.7
Nickel (Ni), % 0
0 to 0.0020
Silicon (Si), % 0
0 to 0.1
Silver (Ag), % 99.9 to 100
0
Zinc (Zn), % 0
0 to 0.2
Residuals, % 0
0 to 0.010