MakeItFrom.com
Menu (ESC)

EN 1.4301 Stainless Steel vs. 204.0 Aluminum

EN 1.4301 stainless steel belongs to the iron alloys classification, while 204.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4301 stainless steel and the bottom bar is 204.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190 to 270
90 to 120
Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 14 to 46
5.7 to 7.8
Fatigue Strength, MPa 200 to 330
63 to 77
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 610 to 900
230 to 340
Tensile Strength: Yield (Proof), MPa 220 to 570
180 to 220

Thermal Properties

Latent Heat of Fusion, J/g 290
390
Maximum Temperature: Mechanical, °C 940
170
Melting Completion (Liquidus), °C 1430
650
Melting Onset (Solidus), °C 1380
580
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 15
120
Thermal Expansion, µm/m-K 16
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
29 to 34
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
87 to 100

Otherwise Unclassified Properties

Base Metal Price, % relative 15
11
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 3.0
8.0
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 140
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 220
12 to 23
Resilience: Unit (Modulus of Resilience), kJ/m3 120 to 820
220 to 350
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 22 to 32
21 to 31
Strength to Weight: Bending, points 20 to 27
28 to 36
Thermal Diffusivity, mm2/s 4.0
46
Thermal Shock Resistance, points 14 to 20
12 to 18

Alloy Composition

Aluminum (Al), % 0
93.4 to 95.5
Carbon (C), % 0 to 0.070
0
Chromium (Cr), % 17.5 to 19.5
0
Copper (Cu), % 0
4.2 to 5.0
Iron (Fe), % 66.8 to 74.5
0 to 0.35
Magnesium (Mg), % 0
0.15 to 0.35
Manganese (Mn), % 0 to 2.0
0 to 0.1
Nickel (Ni), % 8.0 to 10.5
0 to 0.050
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0 to 0.2
Sulfur (S), % 0 to 0.015
0
Tin (Sn), % 0
0 to 0.050
Titanium (Ti), % 0
0.15 to 0.3
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15

Comparable Variants