MakeItFrom.com
Menu (ESC)

EN 1.4301 Stainless Steel vs. 242.0 Aluminum

EN 1.4301 stainless steel belongs to the iron alloys classification, while 242.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4301 stainless steel and the bottom bar is 242.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190 to 270
70 to 110
Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 14 to 46
0.5 to 1.5
Fatigue Strength, MPa 200 to 330
55 to 110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Shear Strength, MPa 430 to 550
150 to 240
Tensile Strength: Ultimate (UTS), MPa 610 to 900
180 to 290
Tensile Strength: Yield (Proof), MPa 220 to 570
120 to 220

Thermal Properties

Latent Heat of Fusion, J/g 290
390
Maximum Temperature: Mechanical, °C 940
210
Melting Completion (Liquidus), °C 1430
640
Melting Onset (Solidus), °C 1380
530
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 15
130 to 170
Thermal Expansion, µm/m-K 16
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
33 to 44
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
96 to 130

Otherwise Unclassified Properties

Base Metal Price, % relative 15
12
Density, g/cm3 7.8
3.1
Embodied Carbon, kg CO2/kg material 3.0
8.3
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 140
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110 to 220
1.3 to 3.4
Resilience: Unit (Modulus of Resilience), kJ/m3 120 to 820
110 to 340
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 22 to 32
16 to 26
Strength to Weight: Bending, points 20 to 27
23 to 32
Thermal Diffusivity, mm2/s 4.0
50 to 62
Thermal Shock Resistance, points 14 to 20
8.0 to 13

Alloy Composition

Aluminum (Al), % 0
88.4 to 93.6
Carbon (C), % 0 to 0.070
0
Chromium (Cr), % 17.5 to 19.5
0 to 0.25
Copper (Cu), % 0
3.5 to 4.5
Iron (Fe), % 66.8 to 74.5
0 to 1.0
Magnesium (Mg), % 0
1.2 to 1.8
Manganese (Mn), % 0 to 2.0
0 to 0.35
Nickel (Ni), % 8.0 to 10.5
1.7 to 2.3
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0 to 0.7
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15

Comparable Variants