MakeItFrom.com
Menu (ESC)

EN AC-42000 Aluminum vs. Monel 400

EN AC-42000 aluminum belongs to the aluminum alloys classification, while Monel 400 belongs to the nickel alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-42000 aluminum and the bottom bar is Monel 400.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
160
Elongation at Break, % 1.1 to 2.4
20 to 40
Fatigue Strength, MPa 67 to 76
230 to 290
Poisson's Ratio 0.33
0.32
Shear Modulus, GPa 26
62
Tensile Strength: Ultimate (UTS), MPa 170 to 270
540 to 780
Tensile Strength: Yield (Proof), MPa 95 to 230
210 to 590

Thermal Properties

Latent Heat of Fusion, J/g 500
270
Maximum Temperature: Mechanical, °C 170
1000
Melting Completion (Liquidus), °C 610
1350
Melting Onset (Solidus), °C 600
1300
Specific Heat Capacity, J/kg-K 900
430
Thermal Conductivity, W/m-K 160
23
Thermal Expansion, µm/m-K 22
14

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 38
3.3
Electrical Conductivity: Equal Weight (Specific), % IACS 130
3.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
50
Density, g/cm3 2.6
8.9
Embodied Carbon, kg CO2/kg material 8.0
7.9
Embodied Energy, MJ/kg 150
110
Embodied Water, L/kg 1110
250

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.8 to 5.7
140 to 180
Resilience: Unit (Modulus of Resilience), kJ/m3 64 to 370
140 to 1080
Stiffness to Weight: Axial, points 15
10
Stiffness to Weight: Bending, points 53
21
Strength to Weight: Axial, points 18 to 28
17 to 25
Strength to Weight: Bending, points 26 to 35
17 to 21
Thermal Diffusivity, mm2/s 66
6.1
Thermal Shock Resistance, points 7.9 to 12
17 to 25

Alloy Composition

Aluminum (Al), % 89.9 to 93.3
0
Carbon (C), % 0
0 to 0.3
Copper (Cu), % 0 to 0.2
28 to 34
Iron (Fe), % 0 to 0.55
0 to 2.5
Lead (Pb), % 0 to 0.15
0
Magnesium (Mg), % 0.2 to 0.65
0
Manganese (Mn), % 0 to 0.35
0 to 2.0
Nickel (Ni), % 0 to 0.15
63 to 72
Silicon (Si), % 6.5 to 7.5
0 to 0.5
Sulfur (S), % 0
0 to 0.024
Tin (Sn), % 0 to 0.050
0
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.15
0
Residuals, % 0 to 0.15
0